|
Commercial
/ Industrial Tanks
High Grade Vinylester Tank Liner
• Fiber-free inner surface
suitable for all standard water treatment
applications, including de- ionization
• Offers wide chemical resistance; not
adversely affected by regenerating chemicals
(acid-caustic) or DI water
Strong, Filament Wound Outer Laminate
• Continuous stands of fiberglass reinforced
with high strength epoxy resin
•
Rustproof and corrosion-resistant |
 |
Precision Injection-Molded Threaded Tank Openings
• Filament wound fiberglass flanged top and
bottom openings are also available
• Both
accommodate all industry standard valves and fittings
Full Coupling, Threaded Dome and Side Hole Options
• Available in all 24" to 48" vinylester
tanks
• Dome holes offered in 1.5"
and 2" configurations
• Side holes
(up to two per tank) available in 2" and 3"
diameters
Operating Parameters
• Maximum operating pressure: 150 PSI (10.2
BAR)
• Maximum operating temperature:
120°F (49°C)
Tank Connections
• The following are available for
bothsingle and double entry tanks:
–
4" - 8" UN
–
6" - 8" UN
–
4.5" Buttress
–
6" Flanged
• B, C, D dimensions
for top and/or bottom flangedopening tanks:
–
Top Flange: Increase tank height listed by 2.5"
(6.4 cm) for 24", 30", and 36" tanks,
and by 3" (7.6 cm) for 42" and 48"
tanks.
–
Bottom Flange: Clearance from the floor to tank
bottom is reduced by 2.5" (6.4 cm) for 24",
30", and 36" tanks, and by 3" (7.6
cm) for 42" and 48" tanks.
Industry Approved
• Tanks designed
and tested to meet industry standards, ensuring
top field performance:
–
NSF®Standard 44
–
UDT
Warranty
•
All commercial/light industrial tanks are backed
by an exclusive limited manufacturer’s warranty:
–
Sizes 24" through 48": 5-year limited
warranty
–
2-year limited warranty in de-ionization application
Residential
/ Light Commercial Tanks
Seamless, One-Piece
ABS Tank Liner
• Blow molded
ABS shell promotes superior adhesion to filament
wound outer laminate
• Smooth, fiber-free
inner surface with high chemical resistance
• Not adversely affected by regenerating
chemicals (acid-caustic) or DI water
Strong, Filament Wound Outer Laminate
• Continuous strands of fiberglass reinforced
with high strength epoxy resin
•
Excellent impact and abrasion resistance
• Rustproof and corrosion-resistant
|
 |
Precision Injection - Molded Threads
• Accommodate all industry standard valves
and fittings
Dome Hole Option
• Available
in 8" through 16" diameter tanks
•
Injection molded ABS fitting provides a 1"
opening with full internal threads
• Fill
cap features o-ring seal with straight thread; no
tapered thread binding on the tank wall
Operating Parameters
• Maximum
operating pressure: 150 PSI (10.2 BAR)
•
Maximum operating temperature: 120°F (49°C)
Industry Approved
• Tanks designed
and tested to meet industry standards, ensuring
top field performance:
–
NSF®Standard 44
–
UDT
–
WQA Standard S-100 Warranty
• All residential and light commercial tanks
are backed by an exclusive limited manufacturer’s
warranty:
Sizes 5"-13": 10-year limited warranty
Sizes 14"-24": 5-year limited warranty
Residential/Light CommercialTank Fittings and Accessories
• A full line of closures, adapters, hubs,
laterals and other fittings and accessories are
available from Park International |
|
|
|
 |
|
|
