PROTEC™ Pressure Vessels

Our Vessels are the highest quality product available. We understand that these products are expected to last the entire life of the RO system. In order to help ensure the life of the pressure vessel, we have selected the best materials and used the best fabrication methods available in the manufacture of our products. When you select PROTEC™ products, here are some of the benefits you receive.

Pressure Vessels Designed for 1st Time Quality

Each of our products has been designed to provide the highest level of quality without excessive repair or rework that can compromise the quality and life of the pressure vessel. This 1st time quality focus allows us to meet scheduled shipments and other customer expectations in a timely manner while providing the quality products they deserve.

Leak Free Reliability

PROTEC™ pressure vessels are tested as an assembly including the specific heads that will be shipped with each vessel. This attention to detail allows us to claim the best leak-free reliability record in the industry. We understand that know one likes to deal with leaks caused by poor workmanship, low quality materials and insufficient in-house testing. With PROTEC™, you receive high quality leak-free vessels, first time every time.

Pressure Vessels Available with an ASME Code Stamp

Upon request, pressure vessels can be supplied with an ASME Code stamp and if requested, a national Board Registration number. The ASME Code is an internationally recognized safety standard written specifically for fiber reinforced plastic pressure vessels.

PRO-4-300-EP

The PROTEC™ Model PRO-4-300-EP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 300 PSI.

The PRO-4-300-EP will accommodate any make of four-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel.

The Model PRO-4-300-EP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.

PRO-4-600-EP

The PROTEC™ Model PRO-4-600-EP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 600 PSI.

The PRO-4-600-EP will accommodate any make of four-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel.

The Model PRO-4-600-EP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.

PRO-4-1000-EP

The PROTEC™ Model PRO-4-1000-EP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 600 PSI.

The PRO-4-1000-EP will accommodate any make of four-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel.

The Model PRO-4-1000-EP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.

PRO-4-300-SP

The PROTEC™ Model PRO-4-300-SP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 300 PSI.

The PRO-4-300-SP will accommodate any make of four-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel.

The Model PRO-4-300-SP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.

PRO-4-450-SP

The PROTEC™ Model PRO-4-450-SP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 600 PSI.

The PRO-4-450-SP will accommodate any make of four-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel.

The Model PRO-4-450-SP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.