• Permeate Flow: 6000 gpd (22.7 m3/d)
• Salt Rejection Average: 99.7 %

• Configuration: Spiral Wound
• Membrane Polymer: Composite Polyamide
• Nominal Membrane Area: 400 ft2

• Maximum Applied Pressure: 600 psig (4.16 MPa)
• Maximum Chlorine Concentration: < 0.1 PPM
• Maximum Operating Temperature: 113 ^oF (45 ^oC)
• Feedwater pH Range: 3.0 - 10.0
• Maximum Feedwater Turbidity: 1.0 NTU
• Maximum Feedwater SDI (15 mins): 5.0
• Maximum Feed Flow: 75 GPM (17.0 m3/h)
• Minimum Ratio of Concentrate to
• Permeate Flow for any Element: 5:1
• Maximum Pressure Drop for Each Element: 10 psi

* The limitations shown here are for general use. The values may be more conservative for specific projects to ensure the best performance and longest life of the membrane.

• Elements are wet tested for quality assurance using the following conditions:
• 1500 PPM NaCl solution
• 225 psi (1.55 MPa) Applied Pressure
• 77 °F (25 °C) Operating Temperature
• 15% Permeate Recovery
• 6.5 - 7.0 pH Range
• (Data taken after 30 minutes of operation)