FILMTEC SW30-380 Membrane Elements
The Filmtec SW30-380 is a high productivity seawater reverse osmosis element that offers the lowest energy consumption in the industry for optimal economics in two-pass seawater desalination systems. In addition, this element is well suited for high salinity brackish water applications.
Features:
- The high flow and high rejection of membrane used in the SW30-380 helps reduce energy costs in the first pass of two-pass seawater systems.
- Filmtec SW30-380 offers superior economics for desalinating cold water feeds (< 20ºC).
- Filmtec SW30-380 elements deliver high performance without the use of oxidative treatments which is one reason why
- Filmtec elements are more durable and may be cleaned more effectively over a wider pH range (1 - 13) than other RO elements.
Specifications:
|
Membrane Type: |
Polyamide Thin-Film Composite (TFC) |
|
Maximum Operating Temperature: |
113F (45C) |
|
Maximum Operating Pressure: |
1,000 psi (69 bar) |
|
Maximum Pressure Drop: |
15 psi (1.0 bar) |
|
pH Range, Continuous Operation: |
2-11*** |
|
pH Range, Short-Term Cleaning: |
1-13* (30min) |
|
Maximum Feed Silt Density Index: |
5 SDI |
|
Free Chlorine Tolerance: |
<0.1 ppm** |
|
Permeate Flow Rate: |
9,000 GPD (34 m3/day)* |
|
Stabilized Salt Rejection: |
99.4% |
|
Minimum Salt Rejection: |
98.8% |
*The above benchmark values are based on the following test conditions: 32,000 ppm NaCl, 800 psi (5.5 MPa), 77°F (25°C), pH 8 and 8% recovery. Permeate flows for individual elements may vary +/-15%.
**Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure. Most RO systems have carbon pre-filters for this purpose.
***Maximum temperature for continuous operation above pH 10 is 95F (35C).
Note: Active surface area guaranteed +/-5%. Active area as stated by FilmTec is not comparable to nominal membrane area often stated by some manufacturers.
Dimensions:
A: 40.0" (1,016mm) B: 1.125" (29mm) C: 7.9" (201mm) |
|
Pure Aqua manufactures and supplies RO systems, and as a leading RO supplier in the sphere of development and implementation of
reverse osmosis and water treatment systems, Pure Aqua earned a great industry reputation in the RO market.
In all commercial and industrial RO systems that Pure Aqua supplies, we include a cleaning procedures in the operating and installation manual.
Pure Aqua, as a leader RO supplier, has a presence all over the world with a strong dealership network to help our customers.
© 2011 Pure Aqua, Inc. All Rights Reserved.