Standard Features

Engineered for medium-sized deionization (DI) applications, these dependable units feature the same precision electronics and performance characteristics as their large-scale counterparts, all in a smaller, topmounted package. Applications cover the full spectrum of industrial, commercial, medical and agricultural users.

• Auto regeneration when water quality falls below pre-set limit
• Constant monitoring of water quality
• Solid-state reliability for trouble-free service
• No untreated by-pass water
• Automatic shut down in the event of power failure
• Compact, non-corrosive components
• Fiberglass tanks for corrosion resistance
• Convenient, modular construction
• Easy, economical installation
• Optional recirculation pumps
• Parallel or Series Regeneration
• Programmable purge prior to regeneration
• 12 or 24 volt operation (120/60hz/1pH transformer included)
• Custom programmable for automatic precision and simplicity.
• Delivers duplex DI water more economically than any other deionizer.
• The most advanced DI control package available.
• No other DI controls offer so much performance at such a low price.
• The digital-type meter displays both water quality and regeneration time remaining . . . a unique combination that simplifies system process planning.
• A third tank polisher can be accommodated under the single control to pick up sodium or silica leakage, allowing you to easily attain higher purity water at less expense.
• A single set of printed circuit boards control both simultaneous and sequential regeneration. You simply select the desired regeneration mode with DIP switches.
• All programming features are easily accessible on the front panel, so there's no need to enter the control box and disrupt operations.
• Indicator lights show at a glance which phase of the regeneration cycle the system is in.
• Direct eduction of chemicals through multiport valves eliminates additional chemical draw valves.
• Automatic prerinse prior to regeneration prevents false regeneration and preserves chemicals.
• Monitored final rinse rids the system of residual chemicals before the deionizer returns to service.
• Convenient test ports allow sampling of decationized and final DI water for quick, easy checks of system performance.
• Modular construction reduces downtime and simplifies troubleshooting and service.
• Rugged NEMA 12 electrical enclosures, standard on all controls, meet or exceed NEMA showering arc (ICS 2-230), surge withstand (IEEE 587) and electrostatic discharge (MIL-STD-88380).
• Automatic shutoff during power failure stops resins from being exhausted past quality endpoint.
• NOVRAM backup saves all data during a power failure, then returns the display to the last data point when power is restored. No batteries are required.
• A low level sensor can be easily wired into the control to warn of low chemical volumes.
• Provisions for a remote control panel and auxiliary "START REGENERATION" source allow regeneration to be initiated and controlled from a location remote from the actual installation site.
• Level controlled shutoff to a product storage tank can be utilized with the addition of a simple float switch in the storage tank.
• Relays and fuses on the power printed circuit board provide for the operation of recirculation and supply pumps.

Manufacturing

• Paint
• Chemicals
• Cosmetics
• Electronics
• Textiles
• Plating
• Electrodeposition
• Metalworking lubricants
• Glass/Mirror
• Boiler feed
• Humidification control

Laboratories

• Testing and materials
• Research and development
• Glassware rinse
• Hospitals/Mediical facilities

Commercial

• Vehicle washes - cars to aircraft
• Film processing
• Ice plants
• Horticulture/Greenhouse
• Food/Beverage processing
• Printing