Standard Features

Pure Aqua’s water softeners treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling. Softeners can be used in a variety of services including: industrial, municipal, and institutional applications.

• The SF-110F series softeners are designed as fully automatic units either with timer or meter control. The timer controller intiates automatic regeneration features a choice of 7 or 12 day calendar wheels. Time of regeneration and length of time for each regeneration cycle are fully adjustable.
• The metered models start regeneration based on the total gallons used.
• The FRP mineral tank is engineered for a 150 psi working pressure and is tested to 160 psi.
• A premium grade sulfanated nonphenolic polystyrene type resin is contained in the mineral tank. The resin will deliver 30,000 grains per cubic foot when brined at a rate of 15 lbs. per cubic foot.
• The brine tank is a combination of high density polyethylene tank and a brine valve, including an air eliminator valve and a safety brine refill shut off to prevent tank overflow.
• The under drain utilizes either a hub & lateral or a header & lateral system to evenly distribute water and prevent resin loss, and to insure minimal pressure drop at peak flow rates.