Langelier Saturation Index Calculator

This calculator helps you determine the scaling potential of the water by using the Langelier Saturation Index.

Give the values of your water analysis. All the fields with * are required.

Table 1: Input table
pH *  
Conductivity in TDS *
[Ca2+] *
[HCO3-] *
Water temperature *

 

  If you do not have a water analysis you can use the values in table 2. Click on a button at the bottom of table 2

Table 2 : Additional data
pH = 7.7 8 8.6  
TDS = 20 34483 273 mg/l
[Ca2+] = 5 400 49 mg/l
[HCO3-] = 10 140 121 mg/l
T = 20 20 20 degree C
   

Table 3: Results Langelier Saturation Index
pHs
LSI
Indication based on Langelier (1936)
Indication based on improved Langelier by Carrier (1965)
The Langelier Saturation Index formula is

The indications for the LSI and the improved LSI by Carrier are based on the following values:

LSI Indication
LSI<0 Water is undersaturated with respect to calcium carbonate. Undersaturated water has a tendency to remove existing calcium carbonate protective coatings in pipelines and equipment.
LSI=0 Water is considered to be neutral. Neither scale-forming nor scale removing.
LSI>0 Water is supersaturated with respect to calcium carbonate (CaCO3) and scale forming may occur.

LSI (Carrier) Indication
-2,0<-0,5 Serious corrosion
-0,5<0 Slightly corrosion but non-scale forming
LSI = 0,0 Balanced but pitting corrosion possible
0,0<0,5 Sligthly scale forming and corrosive
0,5<2 Scale forming but non corrosive

 

Pure Aqua manufactures and supplies RO systems, and as a leading RO supplier in the sphere of development and implementation of
reverse osmosis and water treatment systems, Pure Aqua earned a great industry reputation in the RO market.
In all commercial and industrial RO systems that Pure Aqua supplies, we include a cleaning procedures in the operating and installation manual.
Pure Aqua, as a leader RO supplier, has a presence all over the world with a strong dealership network to help our customers.

© 2011 Pure Aqua, Inc. All Rights Reserved.