Standard Features

Reverse osmosis, also known as hyper filtration, is used to purify water and remove salts and other impurities.
It is also capable of rejecting bacteria, sugars, proteins, particles, dyes, and other constituents that
have a molecular weight of greater than 150-250 dalton.

• 8” TFC spiral wound membranes
• FRP membrane housing
• Epoxy painted steel frame
• Stainless steel multi-stage pump with TEFC motor
• 5 micron cartridge prefilter
• Power supply: 460V/3Ph/60Hz
• PLC based control panel
• Programmable time delay and set points
• Status lamps
• 115V/60Hz control voltage
• Motor starter
• NEMA 12 enclosure with disconnect and interlocking rotary handle
• Low pressure switch
• High pressure switch
• Liquid filled pressure gauges, panel mount for pump suction, membrane feed, and final concentrate
• Permeate conductivity monitor
• Permeate & concentrate flow meters

Model #	Permeate		Membranes		1000ppm		Dimensions	Approximate Weight
					Motor HP at 1000ppm
	GPD	M3/D	Array	Qty	60 Hz	50 Hz	L"xW"xH"	Lbs
TW-225K-5680	225,000	852	3:2	30	40	40	300x72x80	4,500
TW-270K-6680	270,000	1,022	4:2	36	50	50	300x72x80	4,900
TW-320K-7680	320,000	1,211	5:2	42	50	50	300x72x80	5,200
TW-360K-8680	360,000	1,363	5:3	48	60	80	300x72x80	5,750
TW-410K-9680	410,000	1,552	6:3	54	60	80	300x72x80	6,250
TW-450K-10680	450,000	1,703	7:3	60	80	80	300x72x80	7,500
TW-500K-11680	500,000	1,893	8:3	66	80	100	300x72x80	8,500
TW-550K-11780	550,000	2,082	11:0	77	100	100	350x78x90	9,500
TW-600K-13780	600,000	2,270	13:0	91	100	100	350x78x90	10,500