Industrial FRP Automatic Water Softener
FRP Tank - Diaphragm Valves
How to size a softener
Industrial FRP Tank Automatic Water Softener is sized on the basis of two different parameters, i.e.: Exchange capacity, that is the quantity of water delivered between regenerations, and Maximum Flow Rate, which is the maximum quantity of water requited at any peak usage period. Exchange capacity depends upon the amount of ion exchange resin in the softener and upon the quantity of salt used for resin regeneration. Maximum flow rate is an important datum in case of non-continuous water delivery. It is measured in gallons per minute (GPM).
STANDARD FEATURES
   The Industrial FRP Tank Automatic Water Softener (SF-110F Series) softeners are designed as fully automatic units either with timer or meter control. The timer control initiates softener regeneration at any predetermined time - on any or every day. The metered models start regeneration based on the total gallons used.
   The FRP mineral tank is engineered for a 150 psi working pressure and is tested to 200 psi. It is equipped with a manhole in the upper dome.
   A premium grade sulfanated nonphenolic polystyrene type resin is contained in the mineral tank. The resin will deliver 30,000 grains per cubic foot when brined at a rate of 15 lbs. per cubic foot.
   The brine tank is a combination of high density polystyrene brine measuring tank and a brine valve, including an air eliminator valve and a safety brine refill shut off to prevent tank overflow.
   The automatic regeneration controller features a choice of 7 or 12 day calendar wheels. Time of regeneration and length of time for each regeneration cycle are fully adjustable.
   The automatic regeneration controller features a choice of 7 or 12 day calendar wheels. Time of regeneration and length of time for each regeneration cycle are fully adjustable.
   The under drain utilizes either a hub & lateral or a header & lateral system to evenly distribute water and prevent resin loss, and to insure minimal pressure drop at peak flow rates.
For available options & specifications, please refer to this PDF Library
Industrial FRP Tank Automatic Water Softener SF-110F		 To Top