|
| Shelco
Filters - 36FOS and 52FOS
Multi Cartridge Housings
|
36FOS and
52FOS
Multi
Cartridge Housings
Our thirty six and fifty-two
round models are designed for
flow rates up to 1040 GPM. Housings
accept double-open-end style
cartridges. Options include
304L or 316L stainless steel
with swing bolt closure and
lifting davit. Design pressure
150 psi (10 bar) @ 300° F (149°
C). Standard inlet and outlet
connections for the 36 & 52
FOS series is 6” flanged, with
many other options available
by special order. Standard finish
is Poly-coat over stainless.
All thirty six and fifty-two
round models are standard with
heavy duty stainless steel mounting
legs and FDA grade Buna-N gasket.
|
Features
| •
Designed for industrial and commercial
filtration needs |
| •
Heavy duty stainless steel construction
for durability |
| •
304L standard and 316L stainless steel
available |
| •
Heavy duty swing-bolt closure for
quick cartridge change outs |
| •
All stainless steel heavy duty mounting
legs standard |
| •
Pipe fittings readily accessible for
easy installation |
| •
Knife edge seal at both cartridge
ends to eliminate by-pass |
| •
Adjustable top plate for more cartridge
options |
| •
Adapters for 222 or 226 style cartridges
available by special order. |
| •
Complete selection of pipe fittings,
flanged, sanitary, BSP, grooved and
others |
| •
See ordering guide for a complete
selection of options to fit your application
|
| Standard
Design Specifications |
| Model |
No.
& (Length) of Cartridges † |
Flow
Rate GPM* |
Flange
Size |
Drains |
Vent |
Max
Ctg Diameter |
Ship.
Weight |
|
36FOS3 |
36 (30") |
540 |
6F |
3/4" NPT |
1/2" NPT |
2 5/8" OD |
321 lbs |
|
36FOS4 |
36 (40") |
720 |
6F |
3/4" NPT |
1/2" NPT |
2 5/8" OD |
375 lbs |
|
52FOS3 |
52 (30") |
780 |
6F |
3/4" NPT |
1/2" NPT |
2 5/8" OD |
543 lbs |
|
52FOS4 |
52 (40") |
1,040 |
6F |
3/4" NPT |
1/2" NPT |
2 5/8" OD |
591 lbs |
† Housings will accept: 30"
= (29 1/4" or 30") 40" = (39" or 40") Lengths
*Flow rates are for guide lines only. Actual
flow rates are based on fluid, viscosity,
cartridge type, micron ratings and other factors.
• When using 222 or 226 adapters with the
36 FOS series housing you must change it to
a 32 FOS (32 Round) max cartridge OD 2 3/4"
When using 222 or 226 adapters with the 52
FOS series housing you must change it to a
50 FOS (50 Round) max cartridge OD 2 3/4" |
|
|
|
|
 |
|
|
