Heavy Duty Multi-Cartridge
Stainless Steel Filters		 SSC-R
STANDARD FEATURES OF THE SSC-R SERIES
   Residential and commercial use
   All models feature stainless steel sump and brass head
   Include 1/4" NPT drain
   Sumps have a spring-loaded seal plate to accept cartridges of varying length. This design also allows easier assembly of sump into head by raising the cartridge an inch for easy mating with centering post
   Accepts 9 3/4" and 20" length nominally sized cartridges
   304 stainless steel housings, also available in 316 SS
   Use as filtration for: silt, taste, odor or sediment
   Accept complete range of filter media
   Operating pressure: 150 psi (10.3 bars) maximum
   Operating temperature: 40°-300° F (4°-149° C)
Stainless Steel Filters
Click to enlarge
Model Cartridge Requirements Ports (FPT) Max GPM Drain Size (NPT) Width x Height Wt. (Lbs)
SSC-1-3/4" (1) of 10" 3/4" 6 1/4" 3.5" x 14" 6
SSC-1-1" (1) of 10" 1" 6 1/4" 3.5" x 14" 6
SSC-2-3/4" (1) of 20" 3/4" 12 1/4" 3.5" x 24 8
SSC-2-1" (1) of 20" 1" 12 1/4" 3.5" x 24 8
SSC-1 SS-3/4" (1) of 10" 3/4" 6 1/4" 3.5" x 14" 6
SSC-1 SS-1" (1) of 10" 1" 6 1/4" 3.5" x 14" 6
SSC-2 SS-3/4" (1) of 20" 3/4" 12 1/4" 3.5" x 24" 8
SSC-2 SS-1" (1) of 20" 1" 12 1/4" 3.5" x 24" 8
SSC-3A (1) of 30" 1/2" 18 1/4" 3.5" x 33" 11
SSC-3B (1) of 30" 3/4" 18 1/4" 3.5" x 33" 11
SSC-3C (1) of 30" 1" 18 1/4" 3.5" x 33" 11
NOTE: Maximum flow rate shown is based on a flow of 6gpm per single-length cartridge.   Actual attainable flow rate may be limited by cartridge characteristics or housing port restrictions.
For available options & specifications, please refer to this PDF Library
Stainless Steel Filters SSC Series 		To Top