Stainless Steel Filters

Heavy Duty Multi-Cartridge Stainless Steel Filters

Residential and commercial use
All models feature stainless steel sump and brass head
Include 1/4" NPT drain
Sumps have a spring-loaded seal plate to accept cartridges of varying length. This design also allows easier assembly of sump into head by raising the cartridge an inch for easy mating with centering post
Accepts 9 3/4" and 20" length nominally sized cartridges
304 stainless steel housings, also available in 316 SS
Use as filtration for: silt, taste, odor or sediment
Accept complete range of filter media
Operating pressure: 150 psi (10.3 bars) maximum
Operating temperature: 40°-300° F (4°-149° C)

Model	Cartridge Requirements	Ports (FPT)	Max GPM	Drain Size (NPT)	Width x Height	Wt. (Lbs)
SSC-1-3/4"	(1) of 10"	3/4"	6	1/4"	3.5" x 14"	6
SSC-1-1"	(1) of 10"	1"	6	1/4"	3.5" x 14"	6
SSC-2-3/4"	(1) of 20"	3/4"	12	1/4"	3.5" x 24	8
SSC-2-1"	(1) of 20"	1"	12	1/4"	3.5" x 24	8
SSC-1 SS-3/4"	(1) of 10"	3/4"	6	1/4"	3.5" x 14"	6
SSC-1 SS-1"	(1) of 10"	1"	6	1/4"	3.5" x 14"	6
SSC-2 SS-3/4"	(1) of 20"	3/4"	12	1/4"	3.5" x 24"	8
SSC-2 SS-1"	(1) of 20"	1"	12	1/4"	3.5" x 24"	8
SSC-3A	(1) of 30"	1/2"	18	1/4"	3.5" x 33"	11
SSC-3B	(1) of 30"	3/4"	18	1/4"	3.5" x 33"	11
SSC-3C	(1) of 30"	1"	18	1/4"	3.5" x 33"	11
NOTE: Maximum flow rate shown is based on a flow of 6gpm per single-length cartridge. Actual attainable flow rate may be limited by cartridge characteristics or housing port restrictions.

For available options & specifications, please refer to this PDF Library
Stainless Steel Filters SSC Series